Iisdn/Pstn Network Services Overview - Polycom RealPresence 1500 Administrator's Manual

Defining ISDN/PSTN Network Services
To enable the RealPresence Collaboration Server (RMX) to function within ISDN/PSTN network
environments, network parameters must be defined for the ISDN/PSTN Network Service.
ISDN and Gateway calls are not supported with RealPresence® Collaboration Server 1800 and any
reference to these features relates to the RealPresence® Collaboration Server 1500/2000/4000.
The configuration dialog boxes for both this network services is accessed from the RMX Management pane
of the RMX Web Client or RMX Manager.

IISDN/PSTN Network Services Overview

To enable ISDN and PSTN participants to connect to the MCU, an ISDN/PSTN Network Service must be
defined. A maximum of two ISDN/PSTN Network Services, of the same Span Type (E1 or T1) can be
defined for the Collaboration Server. Each Network Service can attach spans from either or both cards.
Most of the parameters of the first ISDN/PSTN Network Service are configured in the Fast Configuration
Wizard, which runs automatically if an RTM ISDN card is detected in the Collaboration Server during first
time power-up. For more information, see
Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide.
Supported Capabilities and Conferencing Features:
● ISDN video is supported only in Continuous Presence (CP) conferences.
Polycom®, Inc.
Procedure 1: First-time Power-up in the Polycom RealPresence
509