Polycom RealPresence 1500 Administrator's Manual page 340

New Participant - General (Continued)
Field
Extension/Identifier
String
Extension/Identifier
String
4 Usually, additional definitions are not required and you can use the system defaults for the
remaining parameters. In such a case, click OK.
To modify the default settings for advanced parameters, click the Advanced tab.
Polycom®, Inc.
Description
Dial-out participants that connect to an external device such as Cascaded Links or
Recording Links may be required to enter a conference password or an identifying
string to connect. Enter the required string as follows:
[p]...[p][string]
For example: pp4566#
p (optional) - Indicates a pause of one second before sending the DTMF string. Enter
several concatenated [p]s to increase the delay before sending the string. The
required delay depends on the configuration of the external device or conference IVR
system.
String - Enter the required string using the digits 0-9 and the characters * and #. The
maximum number of characters that can be entered is identical to the H.323 alias
length.
If the information required to access the device/conference is composed of several
strings, for example, the conference ID and the conference password, this information
can be entered as one string, where pauses [p] are added between the strings for the
required delays, as follows:
[p]...[p][string][p]...[p] [string]...
For example: p23pp*34p4566#
The Collaboration Server automatically sends this information upon connection to the
destination device/conference. The information is sent by the Collaboration Server as
DTMF code to the destination device/conference, simulating the standard IVR
procedure.
Address Book
310