Hw Monitor Pane Toolbar - Polycom RealPresence 1500 Administrator's Manual

The Hardware Monitor pane displays the following Collaboration Server hardware component's
status columns:
HW Monitor Pane Status Columns
Field
Slot
Type
Status
Temperature
Voltage

HW Monitor Pane Toolbar

The following buttons appear in the tool bar of the Hardware Monitor:
HW Monitor Pane Tool Bar Buttons
Button Name
System Reset
System Shut Down
System Start Up
Polycom®, Inc.
Description
Displays an icon according to the HW component type and the slot number. The
icon displays the hardware status as follows:
• An exclamation point (!) indicates errors in the HW component.
• Card icon with the reset button (
resetting.
• Card icon with diagnostic tools (
diagnostic mode.
The type of hardware component card.
The current status of the HW component; Normal, Major, Critical, Resetting,
Diagnostics, or Empty.
Monitors the temperature of the hardware components; Normal, Major and Critical.
Note: Critical condition invokes a system shut down.
The voltage threshold of the hardware component; either Normal or Major.
Description
Resets and restarts the system. Resetting saves settings and information
that you changed in the system, i.e. IP Services, etc...
Shuts down the system into a standby mode. When the user in the
Collaboration Server Manager/Client presses the System Shut Down
(red) button in the Hardware Monitor tool bar, the system should enter a
standby mode and the LED turns ON. Only the media and control unit
cards are in a standby mode. Shelf Manager remains active.
Turn the system OFF/ON to exit the standby mode.
Starts up the system.
Note: This button is only displayed when connecting directly to the Shelf
Management server.
Collaboration Server Hardware Monitoring
) indicates that the HW component is currently
) indicates that the HW component is in
864