Meeting Rooms List - Polycom RealPresence 1500 Administrator's Manual

The system is shipped with four default Meeting Rooms:
Default Meeting Rooms List
Meeting Room Name
Maple_Room
Oak_Room
Juniper_Room
Fig_Room
Use Time Out as DTMF Delimiter
Users are able to change the behavior of the policy of number collection for VMR Entry Queues,
Conference-IDs and Passwords, allowing a time-out to be used as a stop indicator for the input string.
In previous versions, a # input at the end of the input string indicated completion of the input.
The administrator can configure the system, using the ENABLE_DTMF_NUMBER_WO_DELIMITER
system flag to change the previous system behavior, allowing a time-out to be used as a stop indicator for
the string input for the local IVR, when the MCU collects the Conference-ID in the local Entry Queue or the
Password (chairperson or participant) while routed to the conference.
The flag must be manually added to the System Configuration and its value modified as follows:
Flag Name
ENABLE_DTMF_NUM
BER_WO_DELIMITER
A System Reset in not required for the flag setting to take effect.
For more information see,

Meeting Rooms List

Meeting Rooms are listed in the Meeting Room list pane.
Polycom®, Inc.
ID
1001
1002
1003
1004
YES
If the timer expires, the received digits
validated even if there is no delimiter.
If the received number is not valid, the
system will prompt again for the number
according to number of retries. that are
configured.
Modifying System Flags
Default Line Rate
384 Kbps
384 Kbps
384 Kbps
384 Kbps
Value / Description
This is the default setting for backward
compatibility.
If the timer expires because no delimiter
is received, the number input is not valid.
The system will prompt again for the
number according to number of retries.
that are configured.
.
Meeting Rooms
NO
279