Polycom RealPresence 1500 Administrator's Manual page 808

Manually Added, Modified, Deleted System Flags
Flag
FORCE_ENCRYPTION_FOR_
UNDEFINED_PARTICIPANT_IN_
WHEN_AVAILABLE_MODE
FORCE_G711A
FORCE_RESOLUTION
FORCE_STATIC_MB_ENCODING
G728_IP
G728_ISDN
H239_FORCE_CAPABILITIES
Polycom®, Inc.
Description
When set to YES, Undefined participants must connect encrypted,
otherwise they are disconnected.
When set to NO (default) and the conference Encryption in the Profile is set
to Encrypt When Possible, both Encrypted and Non-encrypted Undefined
participants can connect to the same conferences, where encryption is the
preferred setting.
Default: NO
Setting this flag forces the use of the G711A Audio Codec.
Possible values: YES / NO
Default: NO
Use this flag to specify IP (H.323 and SIP) endpoint types that cannot
receive wide screen resolution and that were not automatically identified as
such by the Collaboration Server.
Possible values are endpoint types, each type followed by a semicolon. For
example, when disabling Wide screen resolution in an HDX endpoint enter
the following string: HDX;
Note: Use this flag when the flag SEND_WIDE_RES_TO_IP is set to YES.
This flag supports Tandberg MXP mode of sending and receiving video by
IP endpoint in HD 720p resolution and Video Quality set to Motion. This
mode is not supported for ISDN endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
Enables or disables declaration of G.728 Audio Algorithm capabilities in IP
calls.
Range: YES / NO
Default: NO
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
Enables or disables declaration of G.728 Audio Algorithm capabilities in
ISDN calls.
Range: YES / NO
Default: NO
When the flag is set to NO, the Collaboration Server only verifies that the
endpoint supports the Content protocols: Up to H.264 or H.263.
When set to YES, the Collaboration Server checks frame rate, resolution
and all other parameters of the Content mode as declared by an endpoint
before receiving or transmitting Content.
Default: NO.
System Configuration Flags
778