Polycom RealPresence 1500 Administrator's Manual page 915

MCU Properties - Event Log
Column
Record ID
Time Stamp
Type
Sensor Number
Sensor Description
Status
Ipmb Address(hex)
3 Click the Active Alarms tab to view alarms related to the Collaboration Server, i.e. temperatures
and main power sensors.
The Active Alarms dialog box displays fields that relate to faults and errors detected on the
Collaboration Server by sensors. The Active Alarms dialog box is divided into two sections: HW
Alarm List and SW Alarm List.
Each section's alarm list can be saved as a *.xls file by clicking the Save HW Alarm List and Save
SW Alarm List buttons respectively. Each alarm list color codes the severity of the alarm; Critical
(RED), Major (ORANGE) and Normal (GREEN).
If you connected to the Hardware Monitoring via the Shelf Management server, the SW Alarm List
section will not be displayed.
Polycom®, Inc.
Description
The recorded ID number of the logged event.
Lists the date and time that the event occurred.
Displays the type of event recorded in the log.
The number of the LED sensor on the Collaboration Server unit.
Describes which sensor the event is being logged.
The sensor's active status.
Contains all the internal IPMI network addresses on the IPMB bus, i.e. 0x20
(Switch), 0x86 (MFA), etc...
Collaboration Server Hardware Monitoring
885