Polycom RealPresence 1500 Administrator's Manual page 1134

The Management Network Properties dialog box is displayed.
c Select the Secured Communication check box.
d Click OK.
A message informs you that your session will be disconnected and that you must re-connect the
RMX using https in the browser URL.
e Click OK.
A system restart confirmation message is displayed.
f Click Yes to restart the RMX.
The RMX restarts. System restart can take 5 - 10 minutes, depending on the RMX's configuration.
g In the MCUs list, select the RMX to be updated.
h In MCU Properties, change the Port number from 80 to 443.
i Click OK.
Polycom®, Inc.
Appendix J - Restoring Defaults
1104