System Flags; Monitoring Precedence Level - Polycom RealPresence 1500 Administrator's Manual

Precedence Settings - Domains, Levels and DSCP Values
Field
Level
r-priority
Audio/Video DSCP
3 Click OK.

System Flags

The following System Flags must be added to system.cfg if their values are to be modified:
● QOS_MANAGEMENT_NETWORK - the overall hex value of the DiffServ field (not just the value of
the DSCP portion) is used as the DSCP value for the RMX Management Network.
 Default: 0x10
 Range: 0x00 - 0xFC
● REJECT_INCORRECT_PRECEDENCE_DOMAIN_NAME - see
description of this flag.
 Default: NO
 Range: YES / NO

Monitoring Precedence Level

The Precedence Level of each connected participant is listed in the Participants list pane.
Polycom®, Inc.
Description
r-priority, Audio DSCP and Video DSCP values can be modified for each of the
six Precedence Levels:
• ROUTINE
• PRIORITY
• IMMEDIATE
• FLASH
• FLASH-OVERRIDE
• FLASH-OVERRIDE+
Modify the r-priority value for the Level.
Range: 0 - 255.
Default: ROUTINE - 0, PRIORITY - 2, IMMEDIATE - 4, FLASH - 6,
FLASH-OVERRIDE - 8, FLASH-OVERRIDE+ - 9
Modify the DSCP value for the Audio/Video DSCP.
Range: 0 - 63.
Default: ROUTINE - 51, PRIORITY - 39, IMMEDIATE - 37,
FLASH - 35, FLASH-OVERRIDE - 33, FLASH-OVERRIDE+ - 31
Ultra Secure Mode
Dial-in calls (above) for a
846