Polycom RealPresence 1500 Administrator's Manual page 791

MCMS_PARAMETERS_USER Flags
Flag
MAX_NUMBER_OF_
MANAGEMENT_SESSIONS_PER_
USER
MAX_PASSWORD_REPEAPED_
CHAR
MAX_PASSWORD_REPEATED_
CHAR
MCU_DISPLAY_NAME
MIN_PASSWORD_LENGTH
MIN_PWD_CHANGE_
FREQUENCY_IN_DAYS
MIN_SYSTEM_DISK_SPACE_TO_
ALERT
MIN_TIP_COMPATIBILITY_LINE_
RATE
Polycom®, Inc.
Description
Defines the maximum number of concurrent management sessions (http
and https connections) per user.
Value: 4 - 80
Default: 10 (20 in Ultra Secure Mode)
Allows the administrator to configure the maximum number of consecutive
repeating characters to be allowed in a user password.
Range: 1 - 4
Default: 2
Allows the administrator to configure the maximum number of consecutive
repeating characters to be allowed in a password.
Range: 1 - 4
Default: 2
The name of the MCU that is displayed on the endpoint's screen when
connecting to the conference.
Default: POLYCOM RMX 1500 / POLYCOM RMX 2000 / POLYCOM RMX
4000 / POLYCOM RealPresence Collaboration Server 1800 depending on
the product type.
The length of passwords.
Possible value: between 0 and 20.
0 means this rule is not enforced, however this rule cannot be disabled
when the Collaboration Server is in Ultra Secure Mode.In Ultra Secure
Mode, passwords must be at least 15 characters in length (default) and can
be up to 20 characters in length.
For more details, see Password
Defines the frequency with which a user can change a password.
Values: 0 -7.
0 (standard default) - users do not have to change their passwords. In Ultra
Secure Mode the retention period is between 1 (default) and 7.
For details, see Defining Password Change
Defines a minimum remaining Collaboration Server disk capacity in
megabytes. If the remaining disk capacity falls below this level an active
alarm is raised.
Default: 2048
This flag determines the minimum line rate at which conferencing entities
such as an Entry Queue or Meeting Room can be TIP-enabled and
TIP-enabled endpoints can connect to them.
CTS version 7 requires a minimum line rate of 1024 kbps and will reject
calls at lower line rates, therefore the System Flag value should be 1024
kbps or higher.
0 means that no minimum line rate is enforced on the conference for TIP
connectivity.
Default: 1024
System Configuration Flags
Length.
Frequency.
761