Polycom RealPresence 1500 Administrator's Manual page 995

Event Fields for Events 17, 23 - H323 PARTICIPANT CONNECTED, SIP PARTICIPANT CONNECTED
Field Description
Participant Status The participant status, as follows:
0 -
1 -
2 - Disconnected
3 - Waiting for dial-in
4 – Connecting
5 - Disconnecting
6 - Partially connected. Party has completed H.221 capability exchange
7 - Deleted by a user
8 -
audio only
10 - Connected with problem
11 - Redialing
Capabilities Not supported.
Always contains the value 0.
Remote Not supported.
Communication Always contains the value 0.
Mode
Secondary Cause Note: This field is only relevant if the Participant Status is Secondary.
The cause for the secondary connection (not being able to connect the video channels), as
follows:
0 - Default
11 - The incoming video parameters are not compatible with the conference video
parameters
13 - The conference video settings are not compatible with the endpoint capabilities
14 - The new conference settings are not compatible with the endpoint capabilities
15 - Video stream violation due to incompatible annexes or other discrepancy
16 - Inadequate video resources
17 - When moved to a Transcoding or Video Switching conference, the participant's video
capabilities are not supported by the video cards
18 - Video connection could not be established
24 - The endpoint closed its video channels
25 - The participant video settings are not compatible with the conference protocol
26 - The endpoint could not re-open the video channel after the conference video mode was
changed
27 - The gatekeeper approved a lower bandwidth than requested
28 - Video connection for the SIP participant is temporarily unavailable
255 - Other
Polycom®, Inc.

Idle

Connected

Secondary. The participant could not connect the video channels and is connected via
Appendix C - CDR Fields, Unformatted File
965