Polycom RealPresence 1500 Administrator's Manual page 942

RealPresence Collaboration Server (RMX) 2000/4000 MPMx D - DSP DSP Sub Test selection
Run a Diagnostics test on a CTNL card by clicking the CTNL2000 hardware component that
indicates Diagnostics in the status column.
7 Select the Run all Tests box and then click Run Selected Tests.
Optional. In the Diagnostics - Active Test box you can select specific tests to run and then click
Run Selected Tests.
Tests Selection - Additional Test Parameters
Parameter
Loop Test
Stop On Failure
Run All Test
8 The selected tests are initialized. In the Tests Monitoring pane there is an indication of the
Connection Status of the Tests.
Connection Status
Polycom®, Inc.
Description
Enter the amount of times the test is to repeat itself in succession.
Stops tests upon a failure.
Runs all tests listed in the TestActive column for the hardware component.
Collaboration Server Hardware Monitoring
912