Polycom RealPresence 1500 Administrator's Manual page 787

MCMS_PARAMETERS_USER Flags
Flag
ISDN_IDLE_CODE_T1
ISDN_LEGACY_EP_CLOSE_
CONTENT_FORCE_H263
ISDN_NUM_OF DIGITS
ISDN_RESOURCE_POLICY
(ISDN)
Polycom®, Inc.
Description
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
The Idle code (silent), transmitted on the ISDN T1 B channels, when there
is no transmission on the channels.
Default: 0x13
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
If set to YES, legacy ISDN endpoints that do not support sharing content
over the Content channel receive video over video channel that is forced to
H.263 video.
Default: NO.
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
When using ISDN Overlap sending dialing mode, this field holds the
number of digits to be received by the MCU.
Default: 9
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
The flag value determines how the ISDN B-channels within configured
spans are allocated.
The robustness of the ISDN network can be improved by allocating
channels evenly (load balancing) among the spans, minimizing the effect of
channel loss resulting from the malfunction of a single span.
Set the flag value to:
• LOAD_BALANCE - To allocate channels evenly among all configured
spans.
• FILL_FROM_FIRST_CONFIGURED_SPAN -
To allocate all channels on the first configured span before allocating
channels on other spans.
• FILL_FROM_LAST_CONFIGURED_SPAN -
To allocate all channels on the last configured span before allocating
channels on other spans.
Default: LOAD_BALANCE
System Configuration Flags
757