Polycom RealPresence 1500 Administrator's Manual page 811

Collaboration server
Hide thumbs Also See for RealPresence 1500:
Table of Contents

Advertisement

Manually Added, Modified, Deleted System Flags
Flag
ITP_CERTIFICATION
LAN_REDUNDANCY
LIMIT_SD_AND_CIF_BW_MPMRX
MANAGE_TELEPRESENCE_
ROOM_SWITCH_LAYOUTS
MAX_ALLOWED_RTV_HD_
FRAME_RATE
MAX_RTV_RESOLUTION
Polycom®, Inc.
Description
When set to NO (default), this flag disables the telepresence features in the
Conference Profile.
Set the flag to YES to enable the telepresence features in the Conference
Profile (provided that the appropriate License is installed).
Enables Local Area Network port redundancy on RealPresence
Collaboration Server (RMX) 2000/4000 RTM LAN Card and RealPresence
Collaboration Server (RMX) 1500 LAN ports on the RTM IP 1500.
Range: YES / NO
Default: NO
Note: If the flag value is set to YES and either of the LAN connections
(LAN1 or LAN2) experiences a problem, an active alarm is raised stating
that there is no LAN connection, specifying both the card and port number.
When to YES (default), limits the maximum negotiated and opened bit rate
for resolutions equal or lower than SD to 1Mbps.
When set to NO no limitation is applicable to SD and CIF bit rates.
Range: YES/NO.
Default: YES.
Determines whether the MLA or the RMX controls the Room Switch
Telepresence Layouts.
When set to NO, the RMX does not manage Telepresence Room Switch
Layouts and they continue to be managed by the MLA.
When set to YES, the RMX manages Telepresence Room Switch
Layouts.
Default: NO
Range: YES / NO
Note: System re-start is not required for this flag's settings to take effect.
For more information see
Defines the threshold Frame Rate (fps) in which RTV Video Protocol
initiates HD resolutions.
Flag values are as follows:
Range: 0-30 (fps)
Default: 0 (fps) - Implements any Frame Rate based on Lync RTV Client
capabilities
Enables you to override the Collaboration Server resolution selection and
limit it to a lower resolution, hence minimizing the resource usage to 1 or
1.5 video resources per call instead of 3 resources. Possible flag values
are:
AUTO (default), QCIF, CIF, VGA or HD720.
System Configuration Flags
Room Switch Telepresence
Layouts.
781

Advertisement

Table of Contents
loading

This manual is also suitable for:

Realpresence 1800Realpresence 2000Realpresence 4000

Table of Contents