Polycom RealPresence 1500 Administrator's Manual page 906

To view the card properties:
1 Click the Active Alarms tab to view alarms related to the hardware component, i.e. temperatures and
main power sensors.
The DSP Card Properties is displayed.
I card.
The mapping between the DSP IDs and the physical slots is as the following:
• ID 1: Slot 0 (in the middle)
• ID 2: Slot 1 (bottom)
• ID 3: Slot 2 (top)
The following information is displayed:
DSP Card Properties - General Info
Field
Hardware Version
Firmware Version
Serial Number
Card Type
Card Part Number
Card Mac Address 1
Card MAC Address 2
2 Click Close to return to the Hardware Monitor pane.
Polycom®, Inc.
Description
The hardware component's version number.
The version number of the software installed on the media card.
The hardware component's serial number.
Displays the type of the media card that occupies the slot.
The part number of the hardware component's board.
Specific hardware address of the component. This address is burnt onto the
component and is automatically identified by the system.
(If applicable) second MAC address.
Collaboration Server Hardware Monitoring
876