Polycom RealPresence 1500 Administrator's Manual page 940

5 You can select any one of the Hardware components indicating Diagnostics/Normal in the status
column and right-click Properties from the menu. The card's General Info/Event Log/Active
Alarms properties are displayed.
You can view Diagnostic Tests & Tests Monitoring by clicking the Diagnostics Tab.
When you click the Advanced Mode the Collaboration Server enters a Diagnostics Mode.
The Advanced Mode can be exited by pressing the yellow System Reset icon. The Collaboration
Server then resets.
The Diagnostics Tests & Monitoring Tests panes are displayed on the right side of the window
pane.
On MPMx/MPMRX and all RTM IP card types, double click each card to view details of the Test
Selection pane as shown in step 6.
Polycom®, Inc.
Collaboration Server Hardware Monitoring
910