Polycom RealPresence 1500 Administrator's Manual page 418

Collaboration server
Hide thumbs Also See for RealPresence 1500:
Table of Contents

Advertisement

Conference Properties - General
Field
Duration
Permanent Conference
Routing Name
Conferencing Mode
Start Time
End Time
Conference Password
Chairperson Password
ID
Profile
Line Rate
Video Switching
Reserve Resources for
Video Participants
Polycom®, Inc.
Description
The expected duration of the conference using the format HH:MM.
Note: This field is displayed in all tabs.
Indicates whether the conference is set as a Permanent Conference, with no
pre-determined End Time. This conference continues until it is terminated by
an administrator, operator or chairperson.
Note: This field is displayed in all tabs.
The ASCII name of the conference. It can be used by H.323 and SIP
participants for dialing in directly to the conference. It is used to register the
conference in the gatekeeper and the SIP server.
The conferencing mode set for the conference: CP, VSW, SVC only or CP and
SVC.
The time the conference started.
The expected conference end time.
Note: This field is not shown when the conference is set as a Permanent
Conference.
A numeric password for participants to access the conference.
A numeric password used by participants to identify themselves as the
conference chairperson.
The conference ID.
The name of the conference Profile from which conference parameters were
taken.
The maximum transfer rate, in kilobytes per second (Kbps) of the call (video
and audio streams).
When selected, the conference is running in a special conferencing mode
which implies that all participants must connect at the same line rate and the
video parameters are set according to the highest common parameters.
Participants with endpoints not supporting the video parameters (such as the
video protocol, resolution and frame rate) selected for the conference will
connect as secondary (audio only). If HD 1080p is selected for the conference,
endpoints that do not support HD 1080p resolution are connected as
Secondary (Audio Only) participants.
Video layout changes are not enabled during a conference.
Note: Video Switching conferencing mode is unavailable to ISDN participants.
For more information, see
Displays the number of video participants for which the system reserved
resources.
Default: 0 participants.
Conference and Participant Monitoring
Video Switching (VSW)
Conferencing.
388

Advertisement

Table of Contents
loading

This manual is also suitable for:

Realpresence 1800Realpresence 2000Realpresence 4000

Table of Contents