Polycom RealPresence 1500 Administrator's Manual page 816

Manually Added, Modified, Deleted System Flags
Flag
REJECT_INCORRECT_
PRECEDENCE_DOMAIN_NAME
REMOVE_EP_FROM_LAYOUT
_ON_NO_VIDEO_TIMER
REMOVE_H323_EPC_CAP_TO_
NON_POLYCOM_VENDOR
REMOVE_H323_HIGH_PROFILE_
CAP_TO_NON_POLYCOM_
VENDOR
REMOVE_H323_HIGH_QUALITY_
AUDIO_CAP_TO_NON_POLYCOM
_VENDOR
REMOVE_H323_LPR_CAP_TO_
NON_POLYCOM_VENDOR
REMOVE_IP_IF_NUMBER_
EXISTS
Polycom®, Inc.
Description
When set to YES, when the Precedence Domain of a SIP dial-in call does
not match the Precedence Domain of the RMX, the call is rejected. For
more information, see MLPP (Multi Level Precedence and
Possible values: YES/NO
Default: No
Enables the removal of empty video cells from a Video Layout.
Used to disable EPC protocol. Use of Polycom's proprietary protocol, High
Profile, EPC, may result in interoperability issues when used with other
vendors' endpoints.
Possible values: YES / NO
Default: NO
Used to disable High Profile protocol. Use of Polycom's proprietary
protocol, High Profile, may result in interoperability issues when used with
other vendors' endpoints.
Possible values: YES / NO
Default: NO
Used to disable the following Audio Codecs:
• G231
• G7221C
• G7221
• G719
• Siren22
• Siren14
Possible values: YES / NO
Default: NO
Used to disable H.323 LPR protocol. Use of Polycom's proprietary protocol,
H.323 LPR, may result in interoperability issues when used with other
vendors' endpoints.
Possible values: YES / NO
Default: NO
Between the time a conference is scheduled and when it becomes active,
the IP of an endpoint may change, especially in an environment that uses
DHCP. This flag determines if the E.164 number is to be substituted for the
IP address in the dial string.
Range: YES / NO
Default: YES - The IP address will be substituted with the E.164 number.
System Configuration Flags
Preemption).
786