Configuring The Workstation - Polycom RealPresence 1500 Administrator's Manual

Configuring the Workstation

The following procedures show how to modify the workstation's networking parameters using the Windows
New Connection Wizard.
For non-Windows operating systems an equivalent procedure must be performed by the system
administrator.
Before connecting directly, you must modify the IP Address, Subnet Mask and Default Gateway settings of
the workstation to be compatible with either the Collaboration Server's Default Management Network or
Alternate Management Network.
To modify the workstation's IP addresses:
1 On the Windows Start menu, select Settings > Network Connections.
2 In the Network Connections window, double-click the Local Area Connection that has Connected
status.
In the Local Area Connection Status dialog box, click the Properties button.
Polycom®, Inc.
Appendix G - Configuring Direct Connections to the Collaboration Server
1002