Polycom RealPresence 1500 Administrator's Manual page 810

Collaboration server
Hide thumbs Also See for RealPresence 1500:
Table of Contents

Advertisement

Manually Added, Modified, Deleted System Flags
Flag
H264_HD_LIVEVIDEO_MIN_
CONTENT_RATE
H323_FREE_VIDEO_RESOURCES
HIDE_CONFERENCE_
PASSWORD
IGNORE_AIM
IP_LINK_ENVIRONMENT
IP_RESPONSE_ECHO
Polycom®, Inc.
Description
Determines the minimum content rate (in kbps) required for endpoints to
share H.264 high quality content via the Content channel When Content
Setting is Live Video.
Range: 0-1536
Default: 384
For use in the Avaya Environment.
In the Avaya Environment there are features that involve converting
undefined dial-in participants' connections from video to audio (or vice
versa). To ensure that the participants' video resources remain available for
them, and are not released for use by Audio Only calls, set this flag to NO.
If set to YES, the Collaboration Server will release video resources for
Audio Only calls.
Default: YES.
If set to YES (default in Ultra Secure Mode):
Conference and Chairperson Passwords that are displayed in the
Collaboration Server Web Client or RMX Manager are hidden when
viewing the properties of the conference.
Automatic generation of passwords (both conference and chairperson
passwords) is disabled, regardless of the settings of the flags:
 NUMERIC_CONF_PASS_DEFAULT _LEN
 NUMERIC_CHAIR_PASS_ DEFAULT_LEN.
For more information see
Default: NO.
Audio Indicate Muted (AIM) is Relevant to H.323 endpoints. When an
endpoint mutes its microphone, it does not necessarily mute its entire audio
stream. This allows sharing of Content that includes audio while
microphones are muted.
When set to:
NO - When the AIM signal is received, the participant is muted and a mute
icon is displayed in the RMX Web Client / RMX Manager.
YES - When the AIM signal is received, the participant is not muted and a
mute icon is not displayed in the RMX Web Client / RMX Manager.
Range: YES, NO
Default: NO
In H.239-enabled MIH Cascading, when MGC is on level 1, setting this flag
to YES will adjust the line rate of HD Video Switching conferences run on
the RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 from
1920Kbps to 18432, 100bits/sec to match the actual rate of the IP Only HD
Video Switching conference running on the MGC.
Note: If the flag MIX_LINK_ENVIRONMENT is set to NO, the
IP_ENVIRONMENT_LINK flag must be set to YES.
When the System Flag value is YES, the Collaboration Server will respond
to ping (IPv4) and ping6 (IPv6) commands. When set to NO, the
Collaboration Server will not respond to ping and ping6 commands.
System Configuration Flags
Automatic Password Generation Flags.
780

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RealPresence 1500 and is the answer not in the manual?

This manual is also suitable for:

Realpresence 1800Realpresence 2000Realpresence 4000

Table of Contents