Enabling Closed Captions - Polycom RealPresence 1500 Administrator's Manual

Enabling Closed Captions

Captions are enabled by a system flag. By default, Closed Captions are disabled.
To change the flag value:
1 On the Collaboration Server menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the MCMS_PARAMETERS tab
The New Flag dialog box is displayed.
3 In the New Flag field enter ENABLE_CLOSED_CAPTION.
4 In the Value field enter YES to enable or NO to disable Closed Captions display.
5 Click OK to close the New Flag dialog box.
The new flag is added to the flags list.
6 Click OK to close the System Flags dialog box.
For flag changes (including deletion) to take effect, reset the MCU. For more information, see
Resetting the Collaboration
Polycom®, Inc.
click the New Flag button.
,
Server.
Additional Conferencing Information
234