System Flags For Cropping Control; Sharing Content During A Conference - Polycom RealPresence 1500 Administrator's Manual

Appendix H - Deployment Into Microsoft Environments
The MAX_MS_SVC_RESOLUTION System Flag operates independently from the
MAX_RTV_RESOLUTION System Flag allowing differing maximum resolutions to be selected for the MS
SVC and RTV protocols.
If you want to modify System Flag values, the flags must be added to the System Configuration file. For
more information see: .
Modifying System Flags

System Flags for Cropping Control

Cropping occurs when the video source (endpoint) aspect ratio is different from the video cell aspect ratio
in the Polycom Video Layout.
For all endpoints other than ITP endpoints and panoramic cells the Collaboration Server calculates the
mismatch percentage between the source video aspect ratio and Polycom video layout cell aspect ratio. The
mismatch percentage is used to determine whether cropping or striping will be applied to the video cell in
the Polycom video layout.
For non-panoramic layouts, cropping and striping can be controlled by adding the
CROPPING_PERCENTAGE_THRESHOLD_GENERAL System Flag and setting its value accordingly.
For panoramic layouts, cropping and striping can be controlled by adding the
CROPPING_PERCENTAGE_THRESHOLD_PANORAMIC System Flag and setting its value accordingly.
For both System Flags:
Range: -1-100.
Default: -1
If the calculation result is less than or equal to the value of the
CROPPING_PERCENTAGE_THRESHOLD_GENERAL System Flag, cropping will be applied.
If the calculation result is greater than the value of the
CROPPING_PERCENTAGE_THRESHOLD_GENERAL System Flag, striping will be applied.
If the CROPPING_PERCENTAGE_THRESHOLD_GENERAL System Flag value is set to 0, cropping will
not be applied.
If the CROPPING_PERCENTAGE_THRESHOLD_GENERAL System Flag value is set to -1 cropping will
always be applied.
If the CROPPING_PERCENTAGE_THRESHOLD_GENERAL System Flag value is set to 100, always
apply cropping with the exception of mobile aspect ratios. Mobile aspect ratios are those with a larger
vertical aspect than horizontal for example 3:4.
Example: A mobile Lync client sends 288x352 (3:4) aspect ratio. Cropping this resolution to 16:9 would
require the cropping of 190 pixels on the vertical aspect. The mismatch calculation would yield 190/352 ~54.
If the applicable System Flag's value is set to >= 54, striping, rather than cropping, is applied.
For more information see, .
Modifying System Flags

Sharing Content During a Conference

Using Polycom CSS (Content Sharing Suite) plug in, Lync 2013 clients are able to share content in Polycom
Content sessions in both Collaboration Server Hosted calls and Cascaded Lync 2013 AVMCU calls, with
both Lync 2010 & 2013 clients.
Polycom®, Inc. 1018