Polycom RealPresence 1500 Administrator's Manual page 786

MCMS_PARAMETERS_USER Flags
Flag
GK_MANDATORY_FOR_CALLS_O
UT
H263_ANNEX_T
HD_THRESHOLD_BITRATE
HIDE_SITE_NAMES
HW_FOLLOW_SPEAKER_
RESOLUTION_ON_1X1_LAYOUT
INTERNAL_SCHEDULER
ISDN_COUNTRY_ CODE
ISDN_IDLE_CODE_E1
Polycom®, Inc.
Description
If set to YES, a gatekeeper is required to perform H.323 outgoing calls. If a
gatekeeper is not configure on the Collaboration Server, the calls will fail.
If set to NO (default), gatekeeper is not required to dial out to H.323
participants and calls can be dialed out with or without a gatekeeper.
Set to NO to send the content stream without Annex T and enable Aethra
and Tandberg endpoints, that do not support Annex T, to process the
content.
Default: YES
Sets the minimum bit rate required by endpoints to connect to an HD
Conference. Endpoints that cannot support this bit rate are connected as
audio only.
Range: 384kbps - 4Mbs (Default: 768)
From version 7.6.1, in MPMx Card Configuration Mode, this flag has been
replaced by the Enable Site Names option in the Conference Profile - Site
Names dialog box. It allows you to enable or disable the display of site
names in conferences per conference.
In versions prior to 7.6, set this flag to ON to cancel the display of site
names.
When set to ON and the display is disabled, the flag
SITE_NAMES_ALWAYS_ON =YES is ignored.
Default: OFF
Note: This option is unavailable in VSW conferences.
Enables endpoints capable of higher resolution In a conference where
some endpoints are lower than 4CIF and others are higher to receive the
Indication icons.
When set to NO (default) this flag prevents potential scheduling conflicts
from occurring as a result of system calls from external scheduling
applications such as Polycom ReadiManager®, CMA™ 4000/5000 and
others via the API.
Set to YES to schedule conference reservations using an external
scheduling application.
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
The name of the country in which the MCU is located.
Default: COUNTRY_NIL
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
The Idle code (silent), transmitted on the ISDN E1 B channels, when there
is no transmission on the channels.
Default: 0x54
System Configuration Flags
756