Polycom RealPresence 1500 Administrator's Manual page 728

System Information (Continued)
Field
Total Number of Event Mode
Resources
RMX Version
ISDN/PSTN
Encryption
Telepresence Mode
Serial Number
Multiple Services
HD
SVC
Polycom Partners
Memory Size [MB]
Card Configuration Mode
Polycom®, Inc.
Description
Displays the number of video/voice resources licensed for a system in
Event Mode Licensing. It also determines the conference type that is
available on the system.
0 - indicates that this Licensing mode is disabled for this system.
Displays the System Software Version of the MCU.
Indicates whether RTM ISDN hardware has been detected in the system
and if ISDN/PSTN is included in the MCU license.
Range: True / False
Indicates whether Encryption is included in the MCU license. Encryption is
not available in all countries.
Range: True / False
The field value indicates whether the system is licensed to work with RPX
and TPX Telepresence room systems.
Range: True / False
Displays the Serial Number of the Collaboration Server unit.
Indicates if a Multiple Services license is installed.
Indicates if the MCU is licensed to connect endpoints at HD resolutions in
Continuous Presence conferences.
Indicates if the MCU is licensed to run SVC-based conferences.
Indicates that the System Software contains features for the support of
specific Polycom Partner environments.
Indicates the MCU system memory size in Megabytes.
Note: If Memory size is 512MB (Collaboration Server 1500/2000/4000
only), Version 7.1 and later are not supported. DO NOT upgrade the system
to Version 7.1 and later.
Indicates the MCU configuration as derived from the installed media cards:
• MPMx: Only MPMx cards are supported. Any other media card in the
system is disabled.
• MPMRx: Only MPMRx cards are supported. Any other media card in the
system is disabled.
Note: MPM and MPM+ Card Configuration Modes are not supported with
this version.
• The RMX only switches between MPMx and MPMRx Card Configuration
Modes if MPMx or MPMRx cards are removed or swapped while it is
powered on. The Card Configuration Mode switch occurs during the next
restart.
• Installing or swapping MPMx or MPMRx cards while the system is off will
not cause a mode switch when the system is restarted; it will restart in the
Card Configuration Mode that was active previous to powering down.
Administration and Utilities
698