Restoring The Default Settings - Allied Telesis AT-8100L/8 User Manual

Fast ethernet switches at-8100 series management software command line interface user’s guide alliedware plus version 2.2.5

Hide thumbs Also See for AT-8100L/8:

Table of Contents

Chapter 9: Port Parameters

Restoring the Default Settings

To restore the default settings on a port, use the PURGE command in the

Port Interface mode. This example returns ports 12, 13 and 15 to their

default settings:

awplus> enable

awplus# configure terminal

awplus(config)# interface port1.0.12,port1.0.13,port1.0.15

awplus(config-if)# purge

For reference information, refer to "PURGE" on page 223.

Show Quick Links

Table of Contents