Show Ip Route; Table 29. Show Ip Route Command - Allied Telesis AT-8100L/8 User Manual

Fast ethernet switches at-8100 series management software command line interface user’s guide alliedware plus version 2.2.5
Hide thumbs Also See for AT-8100L/8:
Table of Contents

Advertisement

Chapter 14: IPv4 and IPv6 Management Address Commands

SHOW IP ROUTE

--------------------------------------------------------------------
Destination
--------------------------------------------------------------------
192.168.1.0
--------------------------------------------------------------------
326
Syntax
show ip route
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the routes on the switch. Figure 73 displays
an example of the information.
Mask
255.255.255.0
Figure 73. SHOW IP ROUTE Command
The fields are described in Table 29.

Table 29. SHOW IP ROUTE Command

Parameter
Mask
NextHop
Interface
NextHop
Interface
192.168.1.1
vlan1-0
Description
The masks of the management IP
address and the default gateway address.
The mask of the default gateway is
always 0.0.0.0.
The management IP address and the
default gateway address. The
management IP address is the first entry
in the table, and the default gateway
address is the second entry.
The VID of the VLAN to which the
management IP address is assigned.
Protocol
INTERFACE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents