CLEAR PORT COUNTER
Syntax
clear port counter
Parameters
port
Specifies the port whose packet counters you want to clear. You
can specify more than one port at a time in the command.
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to clear the packet counters of the ports. To display the
counters, refer to "SHOW PLATFORM TABLE PORT COUNTERS" on
page 236.
Example
This example clears the packet counters for ports 4 to 7:
awplus# clear port counter port1.0.4-port1.0.7
AT-8100 Switch Command Line User's Guide
port
203