Chapter 30: DHCP Relay Commands
NO IP DHCP-RELAY SERVER-ADDRESS
500
Syntax
no ip dhcp-relay server-address
Parameters
ipaddress
Specifies the IP address of a DHCP server. You may specify only
one IP address.
Mode
Global Configuration mode
Description
Use this command to delete the IP addresses of the DHCP servers from
the relay agent. You may delete only one address at a time with this
command. To display the IP addresses, refer to "SHOW IP DHCP-
RELAY" on page 503.
Confirmation Command
"SHOW IP DHCP-RELAY" on page 503
Example
This example deletes the IP address 214.154.35.78 of a DHCP server
from the relay agent:
awplus> enable
awplus# configure terminal
awplus(config)# no ip dhcp-relay server-address
214.154.35.78
ipaddress