Show Etherchannel - Allied Telesis AT-8100L/8 User Manual

Chapter 52: LACP Commands

SHOW ETHERCHANNEL

760
Syntax
show etherchannel
Parameters
id_number
Specifies the ID number of the aggregator.
Mode
Privileged Exec mode
Description
Use this command to display the ports of specific aggregators on the
switch. Figure 144 illustrates the information.
Aggregator #2 .... po2
Admin Key: 0xff01 - Oper Key: 0x0101
Link: Port1.0.2
Link: Port1.0.3
Link: Port1.0.4
Link: Port1.0.5
Link: Port1.0.6
Figure 144. SHOW ETHERCHANNEL Command
Example
This example displays the ports of the aggregator with the ID number 22:
awplus# show etherchannel 22
id_number
sync
sync
sync
sync
sync