Ip Dhcp-Relay Maxhops - Allied Telesis AT-8100L/8 User Manual

IP DHCP-RELAY MAXHOPS

Syntax
ip dhcp-relay maxhops
Parameters
maxhops
Specifies the maximum hop count for DHCP requests. The range
is 1 to 255.
Mode
Global Configuration Class
Description
Use this command to set the hop count for DHCP requests. The relay
agent discards DHCP requests that have hop counts that exceed the
threshold.
To return the parameter to its default setting of 10 hop counts, use the NO
form of this command.
Confirmation Command
"SHOW IP DHCP-RELAY" on page 503
Examples
This example sets the maximum hop count to 25:
awplus> enable
awplus# configure terminal
awplus(config)# ip dhcp-relay maxhops 25
This example returns the maximum hop count to the default 10 hops:
awplus> enable
awplus# configure terminal
awplus(config)# no ip dhcp-relay maxhops
AT-8100 Switch Command Line User's Guide
maxhops
495