Chapter 4 : Basic Command Line Management Commands; Table 5. Basic Command Line Commands - Allied Telesis AT-8100L/8 User Manual

Chapter 4
Basic Command Line Management
Commands
Command
"? (Question Mark Key)" on page 89
"CLEAR SCREEN" on page 91
"CONFIGURE TERMINAL" on
page 92
"COPY RUNNING-CONFIG
STARTUP-CONFIG" on page 93
"DISABLE" on page 94
"DO" on page 95
"ENABLE" on page 97
"END" on page 98
"EXIT" on page 99
"LENGTH" on page 100
"LOGOUT" on page 102
The basic command line commands are summarized in Table 5.

Table 5. Basic Command Line Commands

All modes
User Exec and
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Global
Configuration
User Exec
All modes
below the
Global
Configuration
mode
All modes
except the User
Exec and
Privileged Exec
Console Line
and Virtual
Terminal Line
User Exec
Mode
Displays the on-line help.
Clears the screen.
Moves you from the Privileged Exec
mode to the Global Configuration
mode.
Updates the active boot configuration
file with the current settings from the
switch.
Returns you to the User Exec mode
from the Privileged Exec mode.
Performs Privileged Exec mode
commands from the Global
Configuration mode.
Moves you from the User Exec mode
to the Privileged Exec mode.
Returns you to the Privileged Exec
mode.
Moves you up one mode.
Specifies the maximum number of
lines the SHOW commands display at
one time on the screen.
Ends a management session.
Description
87