Upload Config Remotelist - Allied Telesis AT-8100L/8 User Manual

AT-8100 Switch Command Line User's Guide

UPLOAD CONFIG REMOTELIST

Syntax
upload config remotelist
Parameters
None
Mode
Global Configuration mode
Description
Use this command to upload boot configuration files from the file system in
the command switch of an enhanced stack to the member switches. The
member switches store the files in their file systems as BOOT.CFG.
The command displays two prompts. The first prompt is shown here:
Enter the configuration file name ->
When you see this prompt, enter the name of the boot configuration file to
transfer from the command switch to the member switches. You may
specify only one filename, and the name must include the extension .cfg.
The second prompt is shown here:
Enter the list of switches ->
At this prompt, enter the enhanced stack numbers of the member switches
to receive the file. If you are uploading a file to more than one switch,
separate the numbers with commas. The numbers are viewed with the
SHOW ESTACK REMOTELIST command.
Example
This example uploads the Sw12a.cfg configuration file from the file system
of the command switch to a member switch that has the ID number 3. The
member switch stores the file as BOOT.CFG in its file system:
awplus> enable
awplus# configure terminal
awplus(config)# upload config remotelist
Enter the configuration file name -> sw12a.cfg
Enter the list of switches -> 3
445