Chapter 8 : Basic Switch Management Commands - Allied Telesis AT-8100L/8 User Manual

Chapter 8
Basic Switch Management Commands
Command
"BANNER EXEC" on page 139
"BANNER LOGIN" on page 141
"BANNER MOTD" on page 143
"BAUD-RATE SET" on page 145
"CLOCK SET" on page 146
"ERASE STARTUP-CONFIG" on
page 147
"EXEC-TIMEOUT" on page 148
"HELP" on page 150
"HOSTNAME" on page 151
"LINE CONSOLE" on page 152
"LINE VTY" on page 153
"NO HOSTNAME" on page 154
"PING" on page 155
"PING IPv6" on page 157
The basic switch management commands are summarized in Table 8.
Table 8. Basic Switch Management Commands
Global
Configuration
Global
Configuration
Global
Configuration
Line Console
Privileged Exec
Privileged Exec
Line Console
All
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
User Exec and
Privileged Exec
User Exec and
Privileged Exec
Mode
Creates a User Exec and Privileged
Exec modes banner.
Creates a login banner.
Creates a message-of-the-day
banner.
Configures the baud rate of the serial
terminal port on the switch.
Manually sets the date and time.
Restores the default settings to all the
parameter settings on the switch.
Sets the console timer which is used
to end inactive management sessions.
Displays how to use the on-line help
system.
Assigns a name to the switch.
Enters the Line Console mode.
Enters the Virtual Terminal Line mode
for a VTY line.
Deletes the switch's name without
assigning a new name.
Instructs the switch to ping another
network device.
Instructs the switch to ping another
IPv6 network device.
Description
137