Displaying The Syslog Server Definitions - Allied Telesis AT-8100L/8 User Manual

Displaying the Syslog Server Definitions

To view the IP addresses of the syslog servers use the SHOW LOG
CONFIG command in the Privileged Exec mode:
awplus# show log config
Here is an example of the information.
Permanent log:
Status ................ Enable
Filter:
Level .............. Informational
Program ............ All
Message Text .......
Host 149.132.45.75:
Filter:
Level .............. Informational
Program ............ All
Message Text .......
Host 149.132.101.128:
Filter:
Level .............. Informational
Program ............ All
Message Text .......
Buffered log:
Status ................ Enable
Filter:
Level .............. Informational
Program ............ All
Message Text .......
Figure 137. SHOW LOG CONFIG Command with Syslog Server Entries
The syslog server entries are marked with "Host," followed by the server IP
addresses. The example display has two syslog server entries that have
the IP addresses 149.132.45.75 and 149.132.101.128.
AT-8100 Switch Command Line User's Guide
713