Show Baud-Rate - Allied Telesis AT-8100L/8 User Manual

Chapter 8: Basic Switch Management Commands

SHOW BAUD-RATE

162
Syntax
show baud-rate
Parameters
None
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to display the settings of the Console port, used for
local management sessions of the switch. Here is an example of the
information.
Asynchronous Port (Console) Information:
Baud Rate .................... 9600
Parity ....................... User Configured
Data bits .................... 0
Stop bits .................... 1
Figure 40. SHOW BAUD-RATE Command
To set the baud rate, refer to "BAUD-RATE SET" on page 145.
Note
The baud rate is the only adjustable parameter on the Console port.
Example
This example displays the settings of the console port:
awplus# show baud-rate