SHOW LOG CONFIG
Syntax
show log config
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to display the configuration of the event log.
awplus# show log config
Permanent log:
Status ................ Enable
Filter:
Level .............. Informational
Program ............ All
Message Text .......
Buffered log:
Status ................ Enable
Filter:
Level .............. Informational
Program ............ All
Message Text .......
Figure 135. SHOW LOG CONFIG Command
The fields in the display are described here:
Table 82. SHOW LOG CONFIG Command
Field
Level
AT-8100 Switch Command Line User's Guide
Description
The severity levels of the messages to be
stored in the log. The default is level 6,
Informational, and higher. The levels are
defined in Table 79 on page 688.
701