Ip Dhcp-Relay Server-Address - Allied Telesis AT-8100L/8 User Manual

Chapter 30: DHCP Relay Commands

IP DHCP-RELAY SERVER-ADDRESS

496
Syntax
ip dhcp-relay server-address
Parameters
ipaddress
Specifies the IP address of a DHCP server. You may specify only
one IP address at a time with this command.
Mode
Global Configuration mode
Description
Use this command to add the IP addresses of DHCP servers to the relay
agent. The agent can have up to five addresses, but you may add only
one address at a time with this command.
Confirmation Command
"SHOW IP DHCP-RELAY" on page 503
Example
This example adds the IP address 149.22.12.56 of a DHCP server to the
relay agent:
awplus> enable
awplus# configure terminal
awplus(config)# ip dhcp-relay server-address 149.22.12.56
ipaddress