Chapter 26: Link-flap Protection Commands
SHOW LINK-FLAP
458
Syntax
show link-flap
Parameters
None
Mode
User Exec and Privileged Exec modes
Description
Use this command to display the status and settings of link-flap protection
on the switch. Here is an example of the information this command
displays.
Link Flap Protection ............ On
Link Flap Member(s) ............. port1.0.1-port1.0.17
Duration ........................ 60
Rate ............................ 8
Figure 101. SHOW LINK-FLAP Command
Example
This example displays the status and settings of link-flap protection:
awplus> enable
awplus# show link-flap