Table of Contents
Advertisement
Restoring the Default Configuration
in the System Utilities Page, the Reset to Factory Defaults function restores the Configuration file to factory
defaults during device reset. When this option is not selected, the device maintains the current Configuration file.
To restore the default system configuration:
1.
Click Utilities > System Utilities. The System Utilities Page opens:
Figure 124:System Utilities Page
The System Utilities Page contains the following fields:
•
Reboot Switch After Resetting to Defaults — Performs reboot after the reset. The possible field values are:
–
Checked — System restarts after the Configuration File is restored to the factory defaults.
–
Unchecked — After the Configuration File is restored to the factory defaults, the system remains in
session.
•
Unit No. — Indicates the unit number.
•
Active Image — indicates the current image file.
•
After Reset — The Image file which is active after the device is reset. The possible field values are:
–
Image 1 — Activates Image file 1 after the device is reset.
–
Image 2 — Activates Image file 2 after the device is reset.
To reset the configuration file to defaults without rebooting the device:
•
Click Apply in the Reset to Factory Defaults section.
To reset the configuration file to defaults with reboot:
1.
Check the Reboot Switch After Resetting to Defaults option.
Page 162
System Utilities
Advertisement
Table of Contents
