AT-8100 Switch Command Line User's Guide
NO LINK-FLAP PROTECTION
Syntax
no link-flap protection
Parameters
None
Mode
Port Interface mode
Description
Use this command to disable link-flap protection on the ports. Link-flap
protection is disabled on the switch if it is disabled on all of the ports.
Confirmation Command
"SHOW LINK-FLAP" on page 458
Example
This example disables link-flap protection on ports 18 and 24:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.18,port1.0.24
awplus(config-if)# no link-flap protection
457