Chapter 10: Port Parameter Commands
SHOW INTERFACE BRIEF
232
Syntax
show interface brief
Parameter
None
Modes
Privileged Exec mode
Description
Use this command to display the administrative and link statuses of all of
the ports on the switch. An example of the information is shown in
Figure 55.
Interface StatusProtocol
port1.0.1admin up down
port1.0.2admin up down
port1.0.3admin up down
port1.0.4admin up down
port1.0.5admin up down
port1.0.6admin up down
Figure 55. SHOW INTERFACE BRIEF Command
The fields are described in Table 13.
Table 14. SHOW INTERFACE BRIEF Command
Field
Interface
Status
Description
Indicates the port number.
Indicates the administrative state of the
port. The administrative state is DOWN if
the port was disabled with the
SHUTDOWN command. Otherwise, the
administrative state of the port is UP. To
disable and enable ports, refer to
"SHUTDOWN" on page 244 and "NO
SHUTDOWN" on page 218, respectively.