Quit - Allied Telesis AT-8100L/8 User Manual

AT-8100 Switch Command Line User's Guide

QUIT

Syntax
quit
Parameters
None
Mode
All modes except the User Exec and Privileged Exec modes.
Description
Use this command to move up one mode in the mode hierarchy. This
command is almost identical to the EXIT command. The difference is that
unlike the EXIT command, the QUIT command cannot be used to end a
management session.
Example
This example uses the QUIT command to return to the Privileged Exec
mode from the Global Configuration mode:
awplus(config)# quit
awplus#
103