Overview - Allied Telesis AT-8100L/8 User Manual

Fast ethernet switches at-8100 series management software command line interface user’s guide alliedware plus version 2.2.5
Hide thumbs Also See for AT-8100L/8:
Table of Contents

Advertisement

Chapter 42: IGMP Snooping Querier

Overview

Multicast routers are an essential part of IP multicasting. They send out
queries to the network nodes to determine group memberships, route the
multicast packets across networks, and maintain lists of the multicast
groups and the ports where group members are located.
IGMP snooping querier can be used in place of multicast routers in
situations where IP multicasting is restricted to a single LAN, without the
need for routing. This feature enables the switch to mimic a multicast
router by sending out general IGMP queries to the host nodes.
IGMP snooping querier supports IGMP version 2.
The switch must have an IP address to add to the queries as its source
address. In addition, the address must be a member of the same network
as the host nodes and the multicasting source. You assign an IP address
to the switch by creating a routing interface in the VLAN. Then apply the IP
address to the VLAN where it sends its queries, to enable IGMP snooping
querier on the VLAN. Allied Telesis recommends using the Default VLAN
which has a VID of 1.
IGMP snooping querier must be used in conjunction with IGMP snooping.
Activate IGMP snooping on all of the switches in the LAN, including the
switches running the IGMP snooping querier. The switches use IGMP
snooping to monitor the responses of the host nodes to the general IGMP
queries sent by the IGMP snooping querier. From the responses, they
create lists of ports that have host nodes that want to join the various
multicast groups and forward the multicast packets to only those ports. For
background information, refer to Chapter 40, "Internet Group Management
Protocol (IGMP) Snooping" on page 593.
Figure 122 on page 619 provides an example of IGMP snooping querier
on a LAN. It consists of a single switch with one VLAN, the Default VLAN.
Both IGMP snooping and IGMP snooping querier are enabled on the
switch. You assign a routing interface to the VLAN, with an IP address that
belongs to the same subnet as the multicast source and the host nodes.
618

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents