Enabling Igmp Snooping - Allied Telesis AT-8100L/8 User Manual

AT-8100 Switch Command Line User's Guide

Enabling IGMP Snooping

The command to enable IGMP Snooping on the switch is the IP IGMP
SNOOPING command in the Global Configuration mode. After you enter
the command, the switch begins to build its multicast table as queries from
the multicast router and reports from the host nodes arrive on its ports. To
enable IGMP Snooping:
awplus> enable
awplus# configure terminal
awplus(config)# ip igmp snooping
597