No Egress-Rate-Limit - Allied Telesis AT-8100L/8 User Manual

Chapter 10: Port Parameter Commands

NO EGRESS-RATE-LIMIT

Syntax
no egress-rate-limit
Parameters
None
Mode
Port Interface mode
Description
Use this command to disable egress rate limiting on the ports.
Confirmation Command
"SHOW RUNNING-CONFIG" on page 164
Example
This example disable egress rate limiting on the ports 4 and 5:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.4,port1.0.5
awplus(config-if)# no egress-rate-limit
216