Chapter 36: Boot Configuration Files
Displaying the Active Boot Configuration File
558
To display the name of the active boot configuration file on the switch, go
to the Privileged Exec mode and enter the SHOW BOOT command. Here
is the command:
awplus# show boot
Here is an example of the information.
Current software
Current boot image : v2.1.1
Backup boot image
Default boot config: /cfg/boot.cfg
Current boot config: /cfg/switch2.cfg (file exists)
Figure 117. SHOW BOOT Command
The "Current boot config" field displays the name of the active boot
configuration file, which for the switch in the example is "switch2.cfg." The
rest of the fields are defined in Table 59 on page 566.
: v2.1.1
: Not set