Displaying the SNTP Client
To display the settings of the SNTP client on the switch, use the SHOW
NTP ASSOCIATIONS command in the Privileged Exec mode.
awplus# show ntp associations
The following is displayed:
SNTP Configuration:
Status ........................ Enabled
Server ........................ 149.134.23.154
UTC Offset .................... +2
Daylight Savings Time (DST) ... Enabled
Figure 77. SHOW NTP ASSOCIATIONS Command
The fields are described in Table 34 on page 347.
To learn whether the switch has synchronized its time with the designated
NTP or SNTP server, use the SHOW NTP STATUS command. An
example of the information is shown in Figure 78.
Clock is synchronized, reference is 149.154.42.190
Clock offset is -5
Figure 78. SHOW NTP STATUS Command
AT-8100 Switch Command Line User's Guide
337