Chapter 50 : Static Port Trunk Commands; Table 86. Static Port Trunk Commands - Allied Telesis AT-8100L/8 User Manual

Chapter 50
Static Port Trunk Commands
Command
"NO STATIC-CHANNEL-GROUP" on
page 734
"PORT-CHANNEL LOAD-BALANCE"
on page 735
"SHOW STATIC-CHANNEL-GROUP"
on page 737
"STATIC-CHANNEL-GROUP" on
page 738
The static port trunk commands are summarized in Table 86 and
described in detail within the chapter.
.

Table 86. Static Port Trunk Commands

Mode
Port Interface
Static Port
Trunk Interface
User Exec and
Privileged Exec
Port Interface
Description
Removes ports from existing static
port trunks and deletes trunks from
the switch.
Sets the load distribution methods of
static port trunks.
Displays the specifications of the
static port trunks.
Creates a new static port trunk and
adds ports to an existing static port
trunk.
733