Show Ip Dhcp Snooping Interface - Allied Telesis AT-8100L/8 User Manual

Chapter 44: DHCP Snooping Commands

SHOW IP DHCP SNOOPING INTERFACE

672
Syntax
show ip dhcp snooping interface
Parameters
port-list
Indicates the list of ports. If no ports are specified, information for
all ports is displayed.
Mode
Privileged Exec mode
Description
Use this command to display DHCP snooping configuration and leases for
a port or a list of ports.
Confirmation Command
"SHOW RUNNING-CONFIG" on page 164
Examples
This example displays DHCP snooping binding information for all of the
ports:
awplus> enable
awplus# show ip dhcp snooping interface
This example displays DHCP snooping interface information for ports 1
through 6:
awplus> enable
awplus# # show ip dhcp snooping interface port1.0.1-
port1.0.6
See Figure 131 on page 673 for a sample of this display. See Table 76 on
page 673 for an explanation of the parameters in this display.
port-list