Displaying The System Environmental Status - Allied Telesis AT-8100L/8 User Manual

Displaying the System Environmental Status

The switch monitors the environmental status of the switch and any
attached PSU, XEM, or expansion option. The environmental status
covers information about temperatures, fans, and voltage. To display this
information, go to User Exec or Privileged Exec mode and enter the
command:
awplus# show system environment
Figure 31 shows an example of the information the command displays.
The columns are described in "SHOW SYSTEM ENVIRONMENT" on
page 113.
Environment Monitoring Status
--------------------------------------------------------
Switch Model: AT-8100S/48POE
--------------------------------------------------------
ID Sensor (Units)
--------------------------------------------------------
0 Temp (Degrees C)
1 Fan 1 (RPM)
2 PSU 1
3 PSU 2
--------------------------------------------------------
Figure 31. SHOW SYSTEM ENVIRONMENT Command
Note
Switches that do not contain fan controllers will not display
temperature readings.
AT-8100 Switch Command Line User's Guide
Reading Status
37 Normal
3467 Normal
On Normal
Off Off
107