Location Civic-Location Command; Location Coord-Location Command - Allied Telesis AT-8100L/8 User Manual

Chapter 1: AlliedWare Plus Command Line Interface
LOCATION
CIVIC-
LOCATION
Command
LOCATION
COORD-
LOCATION
Command
60
awplus(config)# vlan database
awplus(config-vlan)#
Figure 15. VLAN DATABASE Command
You use this command to move from the Global Configuration mode to the
Civic Location mode, to create LLDP civic location entries. The format of
the command is:
location civic-location
This example assigns the ID number 16 to a new LLDP civic location
entry:
awplus(config)# location civic-location 16
awplus(config-civic)#
Figure 16. LLDP LOCATION CIVIC-LOCATION Command
You use this command to move from the Global Configuration mode to the
Coordinate Location mode, to create LLDP coordinate location entries.
The format of the command is:
location coord-location
This example assigns the ID number 8 to a new LLDP coordinate location
entry:
awplus(config)# location coord-location 8
awplus(config-coord)#
Figure 17. LLDP LOCATION COORD-LOCATION Command
id_number
id_number